We will relaunch the website to offer you an improved user experience. Please keep in mind to update your bookmark after go-live.

 

EOL: AUTODOME 7000 IP

AUTODOME 7000 IP
  • Day/night IP camera with 28x or 36x optical zoom (12x digital zoom), Wide Dynamic Range (WDR), and Sodium Vapor White Balance mode that restores objects to their original color
  • New Intelligent Tracking and alarm rules engine with on-board Intelligent Video Analytics (IVA)
  • Enhanced system flexibility with dual recording options (iSCSI, SD card)
  • Fully configurable quad streaming with individually configurable SD streams, based on Bosch’s new Common Product Platform (CPP4)
  • Easy and intuitive installation with multiple pre-configured user modes that allow users to select the camera configuration that is ideal for their applications
  • Overview
    Imager 1/4 in.-type Exview HAD CCD (progressive scan)
    Effective Picture Elements PAL: Approx. 440,000; 752(H) x 582(V)NTSC: Approx. 380,000; 768 (H) x 494 (V)
    Lens 36x Zoom (3.4–122.4 mm) F1.6 to F4.5
    Focus Automatic with manual override
    Iris Automatic with manual override
    Zoom Movement Speed NTSC , PAL
    Optical WIDE / Optical TELE –Focus Tracking ON 4.0 sec. , 4.0 sec.
    Optical WIDE / Optical TELE –Focus Tracking OFF 2.7 sec. , 2.7 sec.
    Optical WIDE / Digital TELE 6.0 sec. , 6.2 sec.
    Digital WIDE / Digital TELE 2.1 sec. , 2.3 sec.
    Optical Zoom Field of View (FOV) 1.7° to 57.8°
    Minimum Working Distance 320 mm (wide) to 1500 mm (tele)
    Gain Control Auto/Manual/Max. (–3 dB to 28 dB, 2 dB steps)
    Synchronization Line-Lock (–120° to 120° vertical phase adjust) or internal crystal
    Aperture Correction Horizontal and vertical
    Digital Zoom 12x
    Sensitivity (typical) 1 30 IRE , 50 IRE
    Day Mode
    SensUp Off(NTSC: 1/60sPAL: 1/50s) 0.66 lux(0.061 fc) , 1.4 lux(0.13 fc)
    SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) 0.04 lux(0.0037 fc) , 0.1 lux(0.0092 fc)
    Night Mode
    SensUp Off 0.104 lux(0.0097 fc) , 0.209 lux(0.0194 fc)
    SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) 0.0052 lux(0.0005 fc) , 0.0103 lux(0.001 fc)
    Electronic Shutter Speed NTSC: 1/4 to 1/10,000 sec., 20 stepsPAL: 1/3 to 1/10,000 sec., 20 steps
    Wide Dynamic Range (WDR) 92 dB (50 dB with WDR Off)
    Signal-to-Noise Ratio (SNR) >50 dB (Weighting ON)
    Backlight Compensation On/Off
    White Balance ATW, Indoor, Outdoor, AWB Hold, Extended ATW, Manual, Outdoor Auto, Sodium Lamp Auto, Sodium Lamp
    Day/Night Monochrome, Color, Auto
    Stabilization On/Off
    1. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light transmission).
    Imager 1/4 in.-type Exview HAD CCD (progressive scan)
    Effective Picture Elements PAL: Approx. 440,000; 752(H) x 582(V)NTSC: Approx. 380,000; 768 (H) x 494 (V)
    Lens 28x Zoom (3.5–98.0 mm) F1.35 to F3.7
    Focus Automatic with manual override
    Iris Automatic with manual override
    Zoom Movement Speed NTSC , PAL
    Optical WIDE / Optical TELE –Focus Tracking ON 2.5 sec. , 2.5 sec
    Optical WIDE / Optical TELE – Focus Tracking OFF 1.7 sec. , 1.7 sec.
    Optical WIDE / Digital TELE – Focus Tracking ON 4.5 sec. , 4.9 sec.
    Optical WIDE / Digital TELE – Focus Tracking OFF 1.7 sec. , 1.7 sec.
    Digital WIDE / Digital TELE 2.0 sec. , 2.5 sec.
    Optical Zoom Field of View (FOV) 2.1° to 55.8°
    Minimum Working Distance 300 mm (wide) to 1500 mm (tele)
    Gain Control Auto/Manual/Max. (–3 dB to 28 dB, 2 dB steps)
    Synchronization Line-Lock (-120° to +120° vertical phase adjust) or internal crystal
    Aperture Correction Horizontal and vertical
    Digital Zoom 12x
    Sensitivity (typical) 2 30 IRE , 50 IRE
    Day Mode
    SensUp Off 0.33 lux(0.031 fc) , 0.66 lux(0.061 fc)
    SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) 0.02 lux(0.002 fc) , 0.04 lux(0.004 fc)
    Night Mode
    SensUp Off 0.066 lux(0.006 fc) , 0.166 lux(0.015 fc)
    SensUp On(NTSC: 1/4s, 15X;PAL 1/3s, 16.7X) 0.0026 lux(0.0002 fc) , 0.0082 lux(0.0008 fc)
    Electronic Shutter Speed NTSC: 1/4 to 1/10,000 sec., 20 stepsPAL: 1/3 to 1/10,000 sec., 20 steps
    Wide Dynamic Range (WDR) 92 dB (50 dB with WDR Off)
    Signal-to-Noise Ratio (SNR) >50 dB (Weighting ON)
    Backlight Compensation On/Off
    White Balance ATW, Indoor, Outdoor, AWB Hold, Extended ATW, Manual, Outdoor Auto, Sodium Lamp Auto, Sodium Lamp
    Day/Night Monochrome, Color, Auto
    Stabilization On/Off
    2. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light transmission).
    In-Ceiling Pendant
    Pan Range 360° cont. , 360° cont.
    Tilt Angle 1° above horizon , 18° above horizon
    Pre-position Speed Pan: 400°/sTilt: 300°/s , Pan: 400°/sTilt: 300°/s
    Pan/Tilt Modes
    Turbo Mode(Manual Control) Pan: 0.1°/s – 400°/sTilt: 0.1°/s – 300°/s
    Normal Mode 0.1°/s-120°/s , 0.1°/s-120°/s
    Preset Accuracy ± 0.1° typ. , ± 0.1° typ.
    In-Ceiling Pendant
    Input Voltage 21-30 VAC ,50/60 HzHigh PoE or PoE+ (IEEE 802.3at, class 4 standard) , 21-30 VAC, 50/60 Hzor High PoE
    Power Consumption,typical 24 W / 44 VA , 60 W / 69 VA (heaters on)or24 W / 44 VA3 (heaters off)
    3. Without heater connected in power supply box for indoor applications.
    Protection on Alarm Inputs Peak current 17 A, peak power 300 W (8/20 μs)
    Protection on Alarm Outputs Peak current 2 A, peak power 300 W (8/20 μs)
    Protection on Relay Output Peak current 7.3 A, peak power 600 W (10/1000 μs)
    Protection on Power Input (Dome) Peak current 7.3 A, peak power 600 W (10/1000 μs)
    Protection on PowerOutput (Arm Power Supply) Peak current 21.4 A, peak power 1500 W (10/1000 μs)
    10/100 EthernetData Lines Peak current 14 A, peak power 200 W (8/20 μs)
    Camera Setup/Control Via web browser (such as Internet Explorer version 7.0 or later), Bosch Configuration Manager, Bosch Video Management System (BVMS), Bosch Recording Station (BRS), or Bosch Video Client (BVC)
    Software Update Network firmware upload
    Video compression H.264 (ISO/IEC 14496‑10), M‑JPEG
    Encoding / Streaming
    H.264 MJPEG
    Scenario
    Stream 1 Stream 2 , Stream 3 , Stream 4
    1 4CIF@30ips , 4CIF@30ips , I-frameonly fromStream 1 , 4CIF@30ips
    2 4CIF@30ips , Copy ofStream 1 , I-frameonly fromStream 1 , 4CIF@30ips
    3 Downscaledstream , Downscaledstream , I-frameonly fromStream 1 , Downscaledstream fromStream 1
    GOP Structure IP, IBP, IBBP
    Data Rate 9.6 kbps to10 Mbps (per stream)
    Overall IP Delay 240 ms
    Resolution (Horizontal x Vertical, PAL/NTSC)
    4CIF/D1 704 x 576/480 (25/30 ips, or 50/60 fields/s for interlaced fields)
    CIF 352 x 288/240 (25/30 ips, or 50/60 fields/s for interlaced fields)
    Ethernet 10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45
    Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (V1, MIB II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication
    Advanced Networking IPv6, QoS
    Audio
    Standard G.711, 8 kHz sampling rateL16, 16 kHz sampling rateAAC, 16 kHz sampling rate
    Signal-to-Noise Ratio >50 dB
    Audio Streaming Bidirectional (full duplex)
    Memory Card Slot User-supplied SD/SDHC/SDXC memory card (maximum 2TB – SDXC)
    Recording Continuous recording of video and audio, alarm/events/schedule recording
    VG4-SFPSCKT
    Description Fiber Optic Ethernet Media Converter kit5.Requires a small form-factor pluggable (SFP) module (sold separately).
    Data Interface Ethernet
    Data Rate 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port
    Compatible Receiver CNFE2MC
    Installation Installed inside a VG4-A-PA0, VG4-A-PA1, VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2 power supply box with supplied mounting hardware
    5. Kit available separately and must be installed inside the AUTODOME power supply box.
    Description Interchangeable modules available for use with MMF or SMF optical fiber.
    Data Interface Ethernet
    Data Rate 10/100 Mbps IEEE 802.3 Compliant
    Weight (all SFP modules) 0.23 kg (0.05 lb)
    Dimensions (LxWxH) SFP-2, SFP-3: 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.) SFP-25, SFP-26: 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)
    Type Connector , Wavelength (transmit / receive) , Max. Distance
    SFP-2 MMF , Duplex LC , 1310 nm / 1310 nm , 2 km (1.2 miles)
    SFP-3 SMF , Duplex LC , 1310 nm / 1310 nm , 20 km(12.4 miles)
    SFP-25 MMF , Single SC , 1310 nm / 1550 nm , 2 km(1.2 miles)
    SFP-26 MMF , Single SC , 1550 nm / 1310 nm , 2 km(1.2 miles)
    Fiber Compatibility
    Optical Fiber Compatibility, MMF 50/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651.
    Optical Fiber Compatibility, SMF 8–10/125 µm SMF. Must meet or exceed fiber standard ITU-T G.652.
    Optical Distance Specifications Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate.
    Sectors/Titling 16 independent sectors with a 20-character title/sector
    Masking 24 individually configurable privacy masks
    Pre-positions 256, each with a 20-character title
    Guard Tours Two (2) types of tours: Recorded tours – two (2) Preset tour – one (1), consisting of up to 256 scenes, consecutively
    Supported Languages English, Chinese, Dutch, French, German, Italian, Japanese, Polish, Portuguese, and Spanish
    Power, Camera RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE)) or PoE+ (IEEE 802.3at, class 4 standard)21-30 VAC, 50/60 Hz
    Power, Heater RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE))21-30 VAC, 50/60 Hz
    Video and Control RJ-45 10/100 Base-TX Ethernet
    Alarm Inputs (7) 2 supervised, 5 non-supervisedProgrammable for “normally open” or "normally closed"
    Alarm Outputs (4) 1 dry contact relay, 3 open collector/transistor outputs32 VDC @ 150 ma max.
    Audio 1 x mono line in, 1 x mono line out
    Signal line in 12 kOhm typical, 1 Vrms max
    Signal line out 1 Vrms at 1.5 kOhm, typical
    In-Ceiling Pendant
    Ingress Protection Rating/Standard IP54, Plenum rated , IP667
    NEMA 4X for:Access to Hazardous parts Ingress of solid foreign objects (falling dirt, circulating dust, settling dust) Ingress of water (dripping and light splashing, hosedown and splashing) Corrosive agents
    Operating Temp. -10°C to 40°C(14°F to 104°F) , -40°C to 55°C(-40°F to 131°F)or-10°C to 55°C(14°F to 131°F)6
    Storage Temp. -40°C to 60°C(-40°F to 140°F) , -40°C to 60°C(-40°F to 140°F)
    Humidity 0% to 90% relative, non-condensing , 0% to 100% relative, condensing
    6. Without heater connected in power supply box for indoor applications.7. Meets requirements for NEMA 4X certification with use of a polycarbonate bubble.Meets requirements for NEMA 4X, except impact test, with use of an acrylic bubble.
    Dimensions See dimensional drawings
    Weight
    In-ceiling 2.58 kg (5.69 lb)
    Indoor/Outdoor Pendant 3.06 kg (6.75 lb)
    Bubble Size 153.1 mm diameter (6.03 in.)
    Construction Material
    Housing In-ceiling: MagnesiumPendant: Cast aluminum
    Bubble In-ceiling: High-resolution acrylic, rugged polycarbonate, or HD high-resolution acrylicPendant: High-resolution acrylic or rugged polycarbonate
    Standard Color White (RAL 9003)
    Standard Finish Powder coated, sand finish
    Bubbles
    In-ceiling
    Clear high-resolution acrylic(Included with in-ceiling PAL camera models.) VGA-BUBBLE-CCLA
    Tinted high-resolution acrylic (Included with in-ceiling NTSC camera models.) VGA-BUBBLE-CTIA
    Clear rugged polycarbonate VGA-BUBBLE-CCLR
    Tinted rugged polycarbonate VGA-BUBBLE-CTIR
    Clear HD high-resolution acrylic VGA-BUBHD-CCLA
    Tinted HD high-resolution acrylic VGA-BUBHD-CTIA
    Pendant
    Clear high-resolution acrylic(Included with pendant camera models.) VGA-BUBBLE-PCLA
    Tinted high-resolution acrylic VGA-BUBBLE-PTIA
    Clear rugged polycarbonate VGA-BUBBLE-PCLR
    Tinted rugged polycarbonate VGA-BUBBLE-PTIR
    Pendant Arm Mounts
    Wall Arms VG4-A-PA0 (no transformer) VG4-A-PA1 (120 VAC transformer) VG4-A-PA2 (230 VAC transformer)
    Pendant Arm with Wiring VG4-PEND-ARM
    Mounting plate for VG4-PEND-ARM VG4-PEND-WPLATE
    Trim skirt for VG4 Series Power Supplies VG4-A-TSKIRT
    Optional Mounting Plates for Arm Mounts
    Corner Mounting Plate VG4-A-9542
    Pole Mounting Plate VG4-A-9541
    Pendant Pipe Mounts
    Pipe Mount Kit VG4-A-9543
    Pendant Roof Mounts
    Roof (Parapet) Mount(VG4-A-9543 Pipe Mount Kit required. Available separately.) VGA-ROOF-MOUNT (with 1.5-inch NPT tapered male threads)
    Optional Mounting Plates for Roof Mounts
    Flat Roof Adapter for Parapet Mount LTC 9230/01
    In-ceiling Support Kits VGA-IC-SP (Bracket for suspended or drop ceilings)

    Images

     

    Features

    360 H264 IVA PoE SD
     
  • Certificates (2)
    Title Type Language
    Declaration of Conformity PDF
    UL PDF
     
  • Documents (20)
     
  • Software & Support (5)