We will relaunch the website to offer you an improved user experience. Please keep in mind to update your bookmark after go-live.


DINION IP bullet 5000 HD

DINION IP bullet 5000 HD
  • Easy to install with auto zoom/focus lens, wizard and pre-configured modes
  • Built-in IR illuminator with 30 m (98 ft) viewing distance
  • 1080p resolution for sharp images
  • Regions of interest and E-PTZ
  • IP66 surface mount box
  • Overview
    Input voltage Power-over-Ethernet (48 VDC nominal); or 24 VAC ±10% / +12 VDC ±10%
    PoE IEEE standard IEEE 802.3af (802.3at Type 1) Power level: Class 3
    Power consumption 950 mA (12 VDC) 750 mA (24 VAC) 260 mA (PoE)
    Sensor type 1/2.8‑inch CMOS
    Active pixels 1937 (H) x 1097 (V); approximately 2.12MP
    Video performance - Sensitivity
    Sensitivity – (3200K, reflectivity 89%, F1.4, 30IRE)
    Color 0.07 lx
    Mono 0.05 lx
    With IR 0.0 lx
    Video performance ‑ Dynamic range
    Dynamic range 76 dB WDR
    Video streaming
    Video compression H.264; M-JPEG
    Streaming Multiple configurable streams in H.264 and M-JPEG, configurable frame rate and bandwidth. Regions of Interest (ROI)
    Camera processing latency <55 ms (max. average at 1080p30)
    GOP structure IP
    Encoding interval 1 to 25 [30] fps
    Encoding regions Up to 8 areas with encoder quality settings per area
    Video resolution (H x V)
    1080p HD 1920 x 1080
    1.3 MP (5:4) (cropped) 1280 x 1024
    720p HD 1280 x 720
    D1 4:3 (cropped) 704 x 480
    432p SD 768 x 432
    288p SD 512 x 288
    144p SD 256 x 144
    Camera installation
    Base frame rate 25/30 fps (PAL/NTSC for analog output)
    Camera LED Enable/disable
    Mirror image On/Off
    Analog output Off, 4:3 letterbox, 4:3 crop, 16:9
    Positioning Coordinates
    Lens wizard Zoom, Autofocus
    Video functions - color
    Adjustable picture settings Contrast, Saturation, Brightness
    White Balance 2500 to 10000K, 4 automatic modes (Basic, Standard, Sodium lamp, Dominant color), Manual mode and Hold mode
    Video functions - ALC
    Day/Night Auto (adjustable), Color, Monochrome
    Shutter Automatic Electronic Shutter (AES); Fixed shutter (1/25[30] to 1/15000) selectable; Default shutter
    IR intensity Adjustable
    Video functions - enhance
    Sharpness Sharpness enhancement level selectable
    Backlight compensation On/off
    Contrast enhancement On/off
    Noise reduction Intelligent Dynamic Noise Reduction with separate temporal and spatial adjustments
    Intelligent defog Intelligent Defog automatically adjusts parameters for best picture in foggy or misty scenes (switchable)
    Signal to Noise Ratio (SNR) >55dB
    Video analysis
    Configurations Silent VCA / Profile1/2 / Scheduled / Event triggered
    Analysis type MOTION+
    Tamper detection Maskable
    Additional functions
    Scene modes Nine default modes, Scheduler
    Privacy Masking Eight independent areas, fully programmable
    Video authentication Off / Watermark / MD5 / SHA-1 / SHA-256
    Display stamping Name; Logo; Time; Alarm message
    Pixel counter Selectable area
    Local storage
    Internal RAM 60 s pre-alarm recording
    Memory card slot Supports up to 32 GB microSDHC / 2 TB microSDXC card. (A memory card of Class 6 or higher is recommended for HD recording)
    Recording Continuous recording, ring recording. alarm/events/schedule recording
    Night vision
    Distance 30 m (98 ft)
    LED 4 LED high efficiency array, 850 nm
    Lens type Automatic Varifocal 2.8 to 12 mm, DC Iris F1.4 – 360
    Lens mount Board mounted
    Horizontal field of view 33° - 100°
    Vertical field of view 19° - 52°
    Input/output connections
    Analog video output CVBS, 1 Vpp, BNC connector, 75 Ohm, approx. 500 TVL Selectable standard
    Alarm input Short or DC 5V activation
    Alarm out Input rating Maximum 0.5 A, 30 VAC / 40 VDC
    Audio input Wires; 10 kOhm typ. 0.707 Vrms
    Audio output Wires; 16 Ohm typ. 0.707 Vrms
    Network connector RJ45
    Audio streaming
    Standard G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC-LC, 48 kbps at 16 kHz sampling rate AAC-LC, 80 kbps at 16 kHz sampling rate
    Signal-to-Noise Ratio >50 dB
    Audio Streaming Full-duplex / half duplex
    Unit discovery IP Helper
    Unit configuration Via web browser or Configuration Manager
    Firmware update Remotely programmable
    Software viewing Web browser; Video Security Client; Video Security App; Bosch Video Management System; Bosch Video Client; or third party software
    Latest firmware and software http://downloadstore.boschsecurity.com/
    Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, V3, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox™, CHAP, digest authentication
    Encryption TLS1.0/1.2, AES128, AES256
    Ethernet 10/100 Base-T, auto-sensing, half/full duplex
    Connectivity Auto-MDIX
    Interoperability ONVIF Profile S; ONVIF Profile G; GB/T 28181
    3-axis adjustment (pan/tilt/rotation) 360º / 90º / 360º
    Dimensions (H x W x D) 271 x 90 x 90 mm (10.7 x 3.5 x 3.5 in) without SMB
    Weight of the camera without SMB 1.3 kg (2.9 lb)
    Weight of the SMB 0.67 kg (1.48 lb)
    Color RAL 9006
    Operating temperature -30 ºC to +60 ºC (-22 ºF to +140 ºF) for continuous operation; -34 ºC to +74 ºC (-30 ºF to +165 ºF) according to NEMA TS 2-2003 (R2008), para using fig. 2.1 test profile
    Storage temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF)
    Operating humidity 5% to 100% relative humidity (condensing) 5% to 93% relative humidity (non condensing)
    Storage humidity 0% to 93% relative humidity (non condensing)




    EasyInstall HD1080 IP66 IRRing PoE
  • Certificates (2)
    Title Type Language
    UL PDF
    Declaration of Conformity PDF
  • Documents (7)

Product variants

NTI-51022-A3S Bullet 2MP 2.8-12mm auto IP66 SMB

Robust IP bullet camera with infrared illumination for outdoor HD surveillance.

Surface mount box

Commercial Type No.: NTI-51022-A3S
Product No.: F.01U.359.507



LTC 9213/01 Pole mount adapter for LTC9210,9212,9215

LTC 9213/01 Pole mount adapter for LTC9210,9212,9215

Flexible pole mount adapter for camera mounts (use together with the appropriate wall mount bracket). Max. 9 kg (20 lb); 3 to 15 inch diameter pole; stainless steel straps

Commercial Type No.: LTC 9213/01
Product No.: F.01U.009.291

VDA-CMT-PTZDOME Corner mount adapter

VDA-CMT-PTZDOME Corner mount adapter

Corner (270°) mount adapter for use with the appropriate wall mount

Commercial Type No.: VDA-CMT-PTZDOME
Product No.: F.01U.288.068

NPD-5001-POE Power over ethernet , 15.4W, 1-port

NPD-5001-POE Power over ethernet , 15.4W, 1-port

Power-over-Ethernet midspan injector for use with PoE enabled cameras; 15.4 W, 1-port

Weight: 200 g (0.44 lb)

Commercial Type No.: NPD-5001-POE
Product No.: F.01U.305.288

NPD-5004-POE Power over ethernet, 15.4W, 4-port

NPD-5004-POE Power over ethernet, 15.4W, 4-port

Power-over-Ethernet midspan injectors for use with PoE enabled cameras; 15.4 W, 4-ports

Weight: 620 g (1.4 lb)

Commercial Type No.: NPD-5004-POE
Product No.: F.01U.305.289

EWE-D5IPHD-IW 12mths wrty ext DINION IP 5000 HD

EWE-D5IPHD-IW 12mths wrty ext DINION IP 5000 HD

12 months warranty extension

Commercial Type No.: EWE-D5IPHD-IW
Product No.: F.01U.346.307