Easy Series

Easy Series
  • Supports up to 32 total input points
  • Advanced false alarm reduction
  • Integrated proximity reader
  • Speaks language of choice
  • Remote Programming Software (RPS) support
  • Simple icon-based control center
  • Integrated digital dialer, voice dialer, text messaging, and two-way audio verification
  • Overview
    Enclosure
    Dimensions (H x W x D): 37 cm x 31.8 cm x 8.5 cm (14.5 in x 12.5 in x 3.25 in)
    Construction Material: Cold-rolled steel, zinc seal, 0.36 mm thick (20 Ga.)
    Environmental Considerations
    Relative Humidity: 93% at 32°C 2°C (89.6°F 35.6°F)
    Operating Temperature: -10°C to +49°C (14°F to +120°F) CE: -10°C to +40°C (+14°F to +104°F) NF A2P: -10°C +55°C (+14°F to +131°F)
    Storage Temperature: -10°C to +55°C (+14°F to +131°F)
    Protection Level IP 30 - IK 04
    Supervised Points
    On-board Hardwire: 8 Single or dual end-of-line (2.2 k EOL) tamper point support Point 1 supports two-wire smoke detectors All points support four-wire smoke detectors Enclosure tamper input (does not reduce point capacity) Reaction time lower than 250ms
    Programmable Outputs (PO)
    On-board: 4 PO 1 only: Configurable relay PO 2 to PO 4: Configurable solid state PO 4 only: Internal supervised speaker driver option
    PO 1 Relay Rating: Contacts: 2 A with no jumper installed; resistive loads only; in a NF A2P certified installation: 1 A Output: 1.2 A with jumper installed; resistive loads only; in a NF A2P certified installation 1 A Operating Voltage: 30 VDC maximum
    PO 2 to PO 4 Rating: 400 mA current sink
    Number of...
    Users: 22 User 1: Master user Users 2 to 21: System users User 22: Duress user
    Events: 500 history events, stamped with time and date
    Tokens and Key Fobs: One per user (User 22 does not receive a token or key fob)
    Phone Line
    Phone line trouble voltage Trouble condition occurs when the phone line voltage is between 1.10 V and 4.75 V
    Control Panel Power Requirements
    AC Input Line Voltage Use a UL Listed 18 V Class 2 transformer (22 VA 50/60 Hz)
    Total Alarm Power: 1.4 A (AC power and standby battery; intrusion applications only). With a 7.0 Ah battery, the following current draws apply to all outputs and devices connected to the system: Up to 170 mA for 24 hr for fire and combined fire/burglary applications Up to 1.2 A for other applications
    Auxiliary Power: 12 VDC, 1.0 A maximum. Includes 110 mA for each control center connected to the system, and up to 400 mA for the programmable outputs.
    Current Draw: 85 mA standby; 160 mA alarm with all outputs activated
    Voltage: 12 VDC nominal (11.2 VDC to 12.3 VDC) The control panel stops processing point faults when the voltage drops below 9.5 VDC.
    Battery: D126 (7 Ah) or D1218 (18 Ah) sealed, lead acid rechargeable 1.7 A maximum recharging current Low battery condition occurs when battery drops below 12 VDC If AC power fails and the battery drops below 9.5 VDC, the control panel stops processing point faults. Disconnect the battery under these conditions. Maximum auxiliary current to recharge standby battery within 72 hours: 12 V, 7 Ah Battery: 400 mA 12 V, 18 Ah Battery: 900 mA In an NF A2P certified installation, use a battery Yuasa NP17-12IFR

    Images

     

    Features

    BubbleLevel EasyInstall EasySupport Indoor
     
  • Certificates (1)
    Title Type Language
    Declaration of Conformity PDF
     
  • Documents (9)
     
 

Product variants

ICP-EZM2-LC Control panel

Easy Series mainboard.

Commercial Type No.: ICP-EZM2-LC
Product No.: F.01U.025.484

 
IUI-EZ1-NEW Keypad, oval

Oval control center that includes a speaker, microphone, function buttons, and a bubble level.

Commercial Type No.: IUI-EZ1-NEW
Product No.: F.01U.275.765

 
 

Accessories

IUI-EZT-5 Token package, black, 5pcs

IUI-EZT-5 Token package, black, 5pcs

Five Easy Series proximity tokens.

Commercial Type No.: IUI-EZT-5
Product No.: F.01U.008.411

 
IUI-EZTR-5 Token package, red, 5pcs

IUI-EZTR-5 Token package, red, 5pcs

Five Easy Series proximity tokens (Red).

Commercial Type No.: IUI-EZTR-5
Product No.: F.01U.083.898

 
 
IUI-EZTO-5 Token package, orange, 5pcs

IUI-EZTO-5 Token package, orange, 5pcs

Five Easy Series proximity tokens (Orange).

Commercial Type No.: IUI-EZTO-5
Product No.: F.01U.083.900

 
IUI-EZTG-5 Token package, green, 5pcs

IUI-EZTG-5 Token package, green, 5pcs

Five Easy Series proximity tokens (Green).

Commercial Type No.: IUI-EZTG-5
Product No.: F.01U.083.901

 
 
IUI-EZTY-5 Token package, yellow, 5pcs

IUI-EZTY-5 Token package, yellow, 5pcs

Five Easy Series proximity tokens (Yellow).

Commercial Type No.: IUI-EZTY-5
Product No.: F.01U.083.902

 
ICP-EZPK Programming key

ICP-EZPK Programming key

Blue key for transferring configurations to and from Easy Series and AMAX panels

Commercial Type No.: ICP-EZPK
Product No.: F.01U.003.534

 
 
RFRC-OPT Wireless option bus interface

RFRC-OPT Wireless option bus interface

A wireless receiver that connects RADION wireless peripherals such as the repeater, as well as detectors and transmitters, to supported Bosch control panels. For use in Europe.

Commercial Type No.: RFRC-OPT
Product No.: F.01U.253.605

 
ICP-EZRU2-V3 ROM update key, V3

ICP-EZRU2-V3 ROM update key, V3

Key for performing Flash upgrades.

Commercial Type No.: ICP-EZRU2-V3
Product No.: F.01U.080.968

 
 
DX2010 Input expander, 8-zone

DX2010 Input expander, 8-zone

Zone expansion module with 8 DEOL zone inputs

Commercial Type No.: DX2010
Product No.: 4.998.800.180

 
B426 Ethernet Communication Module

B426 Ethernet Communication Module

Commercial Type No.: B426
Product No.: F.01U.324.383

 
 
B450 Plug-in Communicator Interface

B450 Plug-in Communicator Interface

Supports two-way IP communication over commercial cellular networks using a plug-in cellular communicator for compatible control panels

Commercial Type No.: B450
Product No.: F.01U.323.797